Dataplex DPX-213 Especificaciones descargar pdf (Pagina 60)

Engineering Standard –NSW

Signalling SMS 02

Cerberus Level Crossing Monitor Equipment

March 2005 Version 1.2 © Australian Rail Track Corporation Page 60 of 118

This document is uncontrolled when printed.

8. Use the menus to find and perform the required tasks.

Method 2

1. Power up the PC and plug the serial cable into serial port A or

COM1: on the PC and channel B on the Level Crossing Monitor.

2. Move to the desired directory and type LX_MAINT and press the

<enter> key.

3. Press <enter> to clear startup screen.

4. A menu will appear. Type 1 and press <enter> to select the

Connect menu.

5. Type 1 and press <enter> to Set Serial Port on the PC.

6. Type '1' to select serial port 1 (com1:) on the PC.

7. Type 9600 and press <enter> to change the bit rate.

8. Press <enter> 4 more times to accept the other default serial

port settings or type in the required values. You should not have

to change these settings.

9. Type 3 and press <enter> to Establish a connection with the

level crossing monitor.

10.A response will be displayed that shows details of the particular

Level Crossing Monitor with which you have established a

connection. If a error message occurs then try another method.

11.Type ‘Q’ and press <enter> to return to the main

menu. 12.Use the menus to find and perform the

required tasks.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 117 118

Sin comentarios

Dataplex DPX-213 Especificaciones Pagina 60